LASER WELDING SYSTEMS FOR THERMOPLASTIC MATERIALS

ANTHROPOMORPHIC ROBOT LASER WELDING SYSTEM
It requires the use of a laser delivered by fibre optics or of a diode laser operating directly assembled on the arm. This system is specific for 3D welding and for large areas, with typical self-teaching programming options which easily process large-size components of complex geometry. It offers the advantage of a wide workspace at a low cost and to be flexible and easily reconfigured for various profiles. The laser power available is 3 kW, on a work radius up to 1.8 m.

TYPICAL FEATURES
Laser source: Nd:YAG or diodes
Power: up to 200 W- Beam delivery: optical fiber
Work volume: up to 0.6 m x 0.6 m x 0.5 m
Manual parts feed or automatic pick and place
Very flexible configuration.

GALVANOMETRIC LASER WELDING SYSTEM
The system is specific for flat weld configurations. The software allows a direct import of a weld profile in the form of CAD file and, if the weld geometry can be optically accessed, there are no limits on the profile complexity. A typical working area is 250 mm x 250 mm. The adoption of a dynamic Z scanner allows 3D welding. Optimum power of the laser source (diode or Nd: YAG) is in the range of 100 W, in order to achieve a sufficient productivity.

TYPICAL FEATURES
Laser source: Nd:YAG or diodes
Power: up to 200 W- Typical work area : up to 250 mm x 250 mm
Axis: 2 or 4 positions rotary stage, manual z axis
Clamping device: pneumatic
Manual parts feed or automatic pick and place

GALVANOMETRIC LASER WELDING SYSTEM FOR THIN FILM
The use of CO 2 laser sources of power up to 500 W allows joining of polymeric films with scanning linear speeds of laser beam up to 500 m/min. This latest solution is particularly suitable for the packaging sector.

TYPICAL FEATURES
Laser source: CO2
Power: up to 500 W
Beamdelivery: scanning head
Typical work area: 500 mm x 500 mm
Solution specifically dedicated to the packaging